SATA Flash Module S1 - Industrial Grade

A highly compact form factor based on the SATA bus interface, the SATA Flash Module S1 Series is a definite contender for compact embedded environments. This solid state devices weighs less than 10 grams and is available for extreme temperature performance as well.

Utilizing its small form factor, SATA Flash Module S1 Series can plug directly into the SATA port on any mainboard and can even be ordered with power on pin-7 . With additional mounting and cabling systems available, clients can integrate multiple drives at a time, add a dedicated drive for OS or other application requirements, run RAID across multiple drives, or pack additional capacity into the smallest of form factors.

Features

SATA Flash Module S1 - Industrial Grade Specifications

SKUs Standard
D1VHSD001G0, D1VHSD002G0, D1VHSD004G0, D1VHSD008G0
Extreme
X1VHSD001G0, X1VHSD002G0, X1VHSD004G0, X1VHSD008G0
Capacities 1 GB, 2 GB, 4 GB, 8 GB
Operating Temperature Ranges 0°C ~ 70°C (Standard), -40°C ~ 85°C (Extreme)
Performance Series S1
Form Factor Vertical
Interface SATA II (3 Gb/sec.)
Flash Memory Single-Level Cell, NAND Flash
Channels Single
Power on pin 7 Available
IDE Transfer Mode
  • PIO mode 0–4
  • Ultra DMA mode 0–2
  • Multiword DMA mode 0–2
Data Transfer Rate Read 30 MB/sec.; Write 25 MB/sec.
DC Input Voltage
  • +5 V
Power Consumption 110 mA
Auto standby and sleep mode Yes
SMART Health Monitoring No
Non-Operating Temperature -50°C to 95°C
Humidity 10% ~ 95% non-condensing
Altitude 80,000 ft.
Vibration
  • 5 G maximum
Shock 50 G/10 ms maximum
Program/Erase Endurance
  • Unlimited read cycles
  • 2,000,000 times
Data Retention 10 Years
MTBF (mean time between failure) >4,000,000 hrs.
ECC (error correction code) Yes
Dimension (w x h x d) 20.5 x 39.2 x 8.0 mm (0.8" x 1.5" x 0.3")
Certifications RoHS, CE, FCC
Conformal Coating Available
Custom Manufacturing and FAE Available
Controllable BOM (bill of materials) Available
Warranty 5 Year

Features

Reliability:
- SLC flash memory for rugged reliability
- 10 Year Data Retention
- High program/erase cycles -- lifetime indicator
- Unlimited number of read cycles
- Static wear-leveling to maximize flash cell lifetime
- High MTBF (mean time between failure) -- reliability indicator
- Onboard ECC (Error Correction Code)
- Five year warranty

Performance and Environmental:
- High sustained and random data access -- specification reported at highly stable levels after break-in
- Extreme shock and vibration tolerances -- measured as g-force
- High humidity tolerance -- non-condensing
- High-altitude operation -- 80,000 ft.
- Extreme operating temperature ranges of -40°C to 85°C (-40°F to 185°F)
- Low power consumption
- Conformal coating available
- Certified RoHS, CE, FCC Compliant

Materials

SATA FM S1 - Industrial Grade data sheet

Related Products